Removing a link from your Oris watch band is a simple process that can be done at home with just a few tools. To get started, make sure you have a pin pusher, pliers, a screwdriver, and optionally, a hammer and tray. Before you begin, measure how many links you need to remove so you can achieve the perfect fit for your watch.
Key Takeaways:
- Removing a link from an Oris watch band can be done at home with minimal tools.
- Measure the number of links to be removed before starting the process.
- You can use a pin pusher or a watch repair kit to remove the excess links.
- The pin pusher method involves placing the watch on a table, inserting the pin pusher, and using pliers to push the pin out.
- If using a watch repair kit, secure the strap with a watch holder and tap the pins out with a hammer.
Once you have removed the desired number of links, you can reconnect the remaining links by aligning the ends and inserting the pin back in. With your properly fitting Oris watch, you can enjoy both style and comfort on your wrist.
How to Remove a Oris Watch Band Link: Pin Pusher Method
The pin pusher method is a popular way to remove a link from an Oris watch band, and it can be easily done with the right tools and careful precision. To begin, gather the necessary tools: a pin pusher, pliers, a screwdriver, and optionally, a hammer and tray. Before starting, measure how many links you need to remove to ensure the perfect fit.
Place the watch on a table, with the push pins facing up. Insert the pin pusher into the hole of the link you wish to remove. Apply gentle pressure with the pliers to push the pin out from the opposite side. Repeat this process for each link you want to remove, until you achieve the desired fit.
If you prefer using a watch repair kit, secure the strap using the watch holder. Position the pusher tool against the pin, and gently tap it with a hammer. This will push the pin out, allowing you to detach the unwanted links. To reconnect the remaining links, align the ends and carefully insert the pin back in.
Once you have removed the necessary links and reconnected the band, ensure that everything is secure and the watch fits comfortably on your wrist. Congratulations! You have successfully removed a link from your Oris watch band and now have a properly fitting timepiece to enjoy.
| Tools required: | Steps: |
|---|---|
| Pin pusher | 1. Measure how many links to remove |
| Pliers | 2. Place the watch on a table with the push pins facing up |
| Screwdriver | 3. Insert the pin pusher into the hole of the link |
| Optional: Hammer and tray | 4. Apply gentle pressure with the pliers to push the pin out |
- Ensure the perfect fit by measuring the number of links to remove
- Use a pin pusher or a watch repair kit for the removal process
- For the pin pusher method, place the watch on a table and gently push the pin out
- For the watch repair kit method, secure the strap, tap the pusher with a hammer, and insert the pin back in
The pin pusher method is a simple and effective way to achieve a proper fit for your Oris watch band. With the right tools and careful precision, you can remove the excess links and enjoy a comfortable wearing experience.
Additional Tips:
- Be patient and take your time when removing the links
- Double-check the fit after removing each link to avoid over-adjustment
- If unsure, seek professional assistance to avoid damaging your watch
By following these steps and using the pin pusher method, you can easily remove a link from your Oris watch band and have a timepiece that fits perfectly on your wrist.
Conclusion
By following the step-by-step guide and using either the pin pusher method or the watch repair kit method, you can confidently remove a link from your Oris watch band and achieve the perfect fit.
To remove a link from an Oris watch band, you will need a pin pusher, pliers, a screwdriver, and optionally, a hammer and tray. First, measure how many links you need to remove.
For the pin pusher method, place the watch on a table with the push pins facing up, insert the pin pusher into the hole, and push the pin out with the pliers. Repeat until the desired number of links have been removed.
Alternatively, you can choose the watch repair kit method. Use the watch holder to secure the strap, and tap the pusher with a hammer to remove the pins. Reconnect the remaining links by aligning the ends and inserting the pin back in.
With your Oris watch band now properly fitting, you can enjoy the comfort and style it brings to your wrist. Whether you opt for the pin pusher method or the watch repair kit method, removing a link from your Oris watch band has never been easier.
FAQ
What tools do I need to remove a link from an Oris watch band?
To remove a link from an Oris watch band, you will need a pin pusher, pliers, a screwdriver, and optionally, a hammer and tray.
How do I remove a link using the pin pusher method?
To remove a link using the pin pusher method, place the watch on a table with the push pins facing up, insert the pin pusher into the hole, and push the pin out with the pliers. Repeat until the desired number of links have been removed.
Can I use a watch repair kit to remove a link from an Oris watch band?
Yes, you can use a watch repair kit to remove a link from an Oris watch band. Use the watch holder to secure the strap and tap the pusher with a hammer to remove the pins. Reconnect the remaining links by aligning the ends and inserting the pin back in.
How do I reconnect the remaining links after removing some?
To reconnect the remaining links after removing some, align the ends and insert the pin back in.
Why is it important to measure the number of links to be removed beforehand?
It is important to measure the number of links to be removed beforehand to ensure that the watch band fits properly.
Source Links
- https://strapsco.com/how-to-remove-watch-links-with-tool/
- https://www.oris.ch/DATA/22948_oris_manual_en.pdf
- https://www.thewatchcompany.com/blog/how-to-remove-watch-links-a-foolproof-guide/
